Features and Benefits
- Beckett HeatManager™ dynamic temperature reset
- Energy saving through circulator-off delay
- Expanded wiring box for easier installation
- Priority override for domestic hot water
- Freeze resistance can help prevent frozen pipes
- Temperature only and LWCO sensors available
- Cycle history diagnostic information
- Backlit LCD screen with programming touch pad
- Oil and gas offerings available
- Cold-Start compatible
- Easy to install Wireless Outdoor Temperature Reset (optional)
Wiring Diagram and Specifications
![Beckett-AquaSmart-Aquasmart-7610-Boiler-Control-for-Oil-and-Gas-Wiring-Diagram-min](https://www.beckettcorp.com/wp-content/uploads/2022/10/Beckett-AquaSmart-Aquasmart-7610-Boiler-Control-for-Oil-and-Gas-Wiring-Diagram-min.jpg)
Electrical Ratings
- Input Voltage: 120 Vac – 60 Hz
- Input Current: 0.1 A + B1 + C1 + ZC
- MAX Input Current: 20A (Reduce to 15A if optional power switch is used)
- 24 Vac thermostat anticipator current: 0.1 Amp
- Burner Current Rating (B1): 7.4 A at 120 Vac FLA; 44.4 A inrush LRA
- Circulator Current Rating (C1): 7.4 A at 120 Vac FLA; 44.4 A inrush LRA
- Zone Control Current Rating (ZC): 7.4 A at 120 Vac FLA; 44.4 A inrush LRA
Temperature Ranges and Differentials
- High Limit Setting Range: 100 to 220°F (37 to 104°C)
- High Limit Differential Range: 5 to 45°F (2 to 25°C)
- Low Limit Setting Range: 100 to 205°F (37 to 96°C)
- Low Limit Differential Range: 10 to 45°F (5 to 25°C)
- Factory Range Stops available—consult factory
Environmental Ratings
- Storage Temperature: -40 to +150 °F (-40 to +65 °C)
- Operating Temperature: -4 to +150 °F (-20 to +65 °C)
- Relative Humidity: 5 to 85% RH, non-condensing and non-crystallizing
Available Part Numbers
Item No. | Description |
---|---|
7610A0001U | AquaSmart Boiler Temperature Control – 120Vac – Oil with Temperature ONLY Sensor (120 Vac burner circuit) |
7610B0001U | AquaSmart Boiler Temperature Control – 120Vac – Gas with Temperature ONLY Sensor (24 Vac burner circuit) |
7610A000LU | AquaSmart Boiler Temperature Control – 120Vac – Oil LESS Sensor (120 Vac burner circuit) |
7610B000LU | AquaSmart Boiler Temperature Control – 120Vac – Gas LESS Sensor (24 Vac burner circuit) |
7600TSU | Replacement Temperature Only Sensor Unit Pack |
7600P01U | Replacement Temperature/LWCO Sensor Unit Pack |
7622TW01U | Brass Immersion Well – 2-3/16” Insulation Depth and 7/8” Insertion Depth, 3/4” NPT Thread |
7622TW02U | Brass Immersion Well – 2-3/16” Insulation Depth and 1-5/8” Insertion Depth, 3/4” NPT Thread |
7622TW03U | Brass Immersion Well – 3-1/2” Insulation Depth and 1-5/8” Insertion Depth, 3/4” NPT Thread |
7622TW04U | Brass Immersion Well – 4-3/4” Insulation Depth and 1-5/8” Insertion Depth, 3/4” NPT Thread |
7600RMU | 48” AquaSmart Remote Mount Kit |
7600WTMU | Wireless Temperature Module for Outdoor Reset |
Downloads & Links
Manuals
AquaSmart 7600 Burner Control Manual
AquaSmart 7610 Burner Control Manual
Product Cross-Reference Sheet
AquaSmart Wiring Manual
Tech Bulletin
AquaSmart Circulator Configuration Error
AquaSmart Firmware Revision
AquaSmart Replaceable Sensor Update
AquaSmart Boiler Temperature Control
AquaSmart Freeze Resistance Operation
Instructions
AquaSmart Temperature Only Sensor Instructions
Low Water Cut-Off Sensor Replacement Instructions
Well Installation Instructions
![AquaSmart® Wireless Outdoor Temperature Reset Module | 7600WTM](https://www.beckettcorp.com/wp-content/uploads/2022/05/Beckett-AquaSmart-Wireless-Temperature-Module-7600wtmu-min-400x284.jpg)
Warranty
Please note, all warranty claims must be initiated through an authorized Beckett supplier/distributor. Distribution policies will not allow Beckett to directly handle warranty claims with installers and/or consumers.