Warranty

WARRANTY LIMITATIONS APPLY. FOR FULL WARRANTY TERMS CONDITIONS AND LIMITATIONS, PLEASE SEE TERMS AND CONDITIONS FOR SALE OF PRODUCTS

The notes below summarize warranty periods that may differ from standard Beckett Terms as of July 7, 2022. Such terms may be modified from time to time, contact customer service or your sales representative for updated information.

The R.W. Beckett Corporation (“Beckett”) warrants to persons who directly purchase its “Products” from Beckett for resale or for incorporation into a product for resale (“Customers”) that its equipment is free from defects in material and workmanship. When such defects occur Beckett, at its option, will either replace or repair the defective product.

THIS WARRANTY IS LIMITED TO THE PRECISE TERMS HEREWITH AND PROVIDES EXCLUSIVE REMEDIES EXPRESSLY IN LIEU OF ALL OTHER REMEDIES, AND IN PARTICULAR THERE SHALL BE EXCLUDED THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IT IS THE RESPONSIBILITY OF THE CUSTOMER TO PROVIDE SUITABLE MONITORING AND/OR BACKUP SYSTEMS TO PREVENT PROPERTY DAMAGE OR INCONVENIENCE DUE TO PRODUCT SHUTDOWN OR FAILURE. IN NO EVENT WILL BECKETT BE LIABLE FOR ANY LABOR COST FOR REMOVAL AND REPLACEMENT OF PARTS OR EQUIPMENT, INCIDENTAL OR CONSEQUENTIAL DAMAGE OF ANY NATURE. (Such as frozen pipes, water damage, or lost production).

Beckett neither assumes nor authorizes any person to assume, for Beckett, any other liability or obligation in connection with the sale of this equipment. Beckett’s liability and the Customer’s exclusive remedy being limited to credit or replacement, as set forth above.

THIS WARRANTY DOES NOT EXTEND TO EQUIPMENT SUBJECTED TO MISUSE, NEGLECT, OR ACCIDENT; NOR DOES IT APPLY UNLESS THE PRODUCT IS PROPERLY INSTALLED BY A QUALIFIED, COMPETENT TECHNICIAN, FAMILIAR WITH THE PRODUCT, WHO IS LICENSED WHERE STATE AND LOCAL CODES REQUIRE, AND WHO IS EXPERIENCED IN MAKING SUCH INSTALLATIONS IN ACCORDANCE WITH NFPA31 OF THE NATIONAL FIRE PROTECTION ASSOCIATION, THE LATEST EDITION OF THE NATIONAL FUEL GAS CODE (NFPA 54), THE LATEST EDITION OF THE INSTALLATION CODE FOR OIL-BURNING EQUIPMENT (CSA B139) AND IN ACCORDANCE WITH ALL APPLICABLE NATIONAL, STATE, PROVINCIAL, LOCAL CODES, AND ANY OTHER AUTHORITIES HAVING JURISDICTION.

Please click on the product category to view the warranty information.

• Original Burner Components

• Pumps

• Motors

• Primary Controls and Accessories

• Igniters

• Aftermarket Burner Parts and Accessories

• Boiler, Furnace Parts and Accessories

• Fuel Supply Devices and Hardware

• Tank Accessories

• Tools, Testers and Gauges

• Gas Valves, Regulators, and Switches

• Misc. (V-Belts, Spill Cleaning Supplies, PPE)

Original Burner Components

• Complete Beckett Burners are not covered by this warranty unless prior authorization from Beckett has been received. An RMA is required before returning any complete burner. Learn more.

• Warranty Period from Date of Manufacture:²

  • 60 Months:
    • Residential Burner Models: AF, AFG, AFII, NX, SF, and CG4
      • Including: Cad Cell, Air Tube Combination, Blower Wheel, Combustion Head, Nozzle Line Assembly, Flame Rods, Couplings
  • 18 Months:
    • Commercial Burner Models: CF375, CF500, CF800, CF1000, CF1400, CF2300, CF2500, CF3500, CG10, CG10-24, CG15, CG25, CG50
    • Specialty Burners: ADC, SDC, SM
      • Including: Cad Cell, Air Tube Combination, Blower Wheel, Combustion Head, Nozzle Line Assembly, Flame Rods, Couplings
  • No Warranty:⁴
    • Nozzles

back to top

Pumps

• Warranty Period from Date of Manufacture:²

  • 36 Months:
    • CleanCut® Fuel Pumps 120 VAC, CleanCut® XL
  • 18 Months:
    • CleanCut Fuel Pumps 12/24VDC, 220VAC, 24VAC
    • All non-Beckett branded fuel pumps, if original to burner
  • These Products are Covered Under the Component Manufacturer’s Warranty:³
    • Aftermarket non-Beckett branded fuel pumps

back to top

Motors

• Warranty Period from Date of Manufacture:²

  • 60 Months:
    • Beckett Branded 120v (21805, 21805E, 21444) Motor
  • 18 Months:
    • Beckett Branded 12v/24v Motors, 240v (22825) Motors
    • All non-Beckett branded motors, if original to burner
  • These Products are Covered Under the Component Manufacturer’s Warranty:³
    • Aftermarket non-Beckett branded motors

back to top

Primary Controls and Accessories

• Warranty Period from Date of Manufacture:²

  • 60 Months:
    • 120VAC GeniSys® Oil Primary Controls (7505, 7565, 7575), AC Ready Kit
  • 18 Months:
    • GeniSys® Oil Primary Controls 12/24VDC (7556, 7559), 240VAC (7580)
    • GeniSys® Gas Primary Controls 120VAC (7590)
    • Beckett Control Accessories
  • These Products are Covered Under the Component Manufacturer’s Warranty:³
    • Non-Beckett branded controls or control accessories

back to top

Igniters

• Warranty Period from Date of Manufacture:²

  • 60 Months:
    • Beckett PowerLight® Igniters 120 VAC Models (Oil/Gas)
  • 36 Months:
    • Beckett PowerLight® Igniters 12/24VDC, 240VAC Models only
  • These Products are Covered Under the Component Manufacturer’s Warranty:³
    • Non-Beckett branded igniters

back to top

Aftermarket Burner Parts and Accessories

• Warranty Period from Date of Manufacture:²

  • 18 Months:
    • Cad Cell, Air Tube Combination, Blower Wheel, Combustion Head, Nozzle Line Assembly, Electrodes, Flame Rods, Couplings
  • No Warranty:⁴
    • Pump Strainers
    • Electrical Terminals/Wire and Accessories

back to top

Boiler, Furnace Parts and Accessories

• Warranty Period from Date of Manufacture:²

  • 60 Months:
    • AquaSmart, Sensors, Thermowell, and Wireless Temperature Module
  • 18 Months:
    • Draft Regulators, Stainless Steel Probe, Liquid Level Probe/Sensor, Chamber Liner and High Temp Rope
    • Hydronic and Steam System Parts
    • Observation Ports and Sight Glasses

back to top

Fuel Supply Devices and Hardware

• Warranty Period from Date of Manufacture:²

  • 60 Months:
    • Tigerloop® De-Aerators
  • 36 Months:
    • Firomatic® Fusible Fire Safety and Check Valves
  • 18 Months:
    • Flex Lines, Filter Life Indicator Gauge and Fittings, Complete spin-on Filters, Complete Canister Filters , Replacement Filter Bowls, Hand Pump
  • No Warranty:⁴
    • Filter Gasket, Fuel Supply Hardware, Replacement Filters and Filter Media

back to top

Tank Accessories

• Warranty Period from Date of Manufacture:²

  • 36 Months:
    • BeckettLink® Hub, Gauge, CTG Tank Hardware
    • Mechanical Combination Fill Alarm and Tank Gauge, Fill Boxes and Vent Caps, Tank Hardware
  • 18 Months:
    • Rocket Tank Monitor, Drop In Fills, Delivery Nozzles, Tools, Parts and Accessories
  • No Warranty:⁴
    • Chemicals, Batteries

back to top

Tools, Testers, and Gauges

• Warranty Period from Date of Manufacture:²

  • 18 Months:
    • Glass/Porcelain Cutter, Combustion/Tune-Up Tools, Hand Tools, Blow-out gun, Gauges and Probes, Coupling Tool
  • No Warranty:⁴
    • Blow-out gun canister

back to top

Gas Valves, Regulators, and Switches

• Warranty Period from Date of Manufacture:²

  • These Products are Covered Under the Component Manufacturer’s Warranty:³
    • Actuated and Manual Valves, Gas Regulators, Safety Gas Valves, Gas Pressure Switches, Air Proving Switches, Gas Valve Actuators

back to top

Misc. (V-Belts, Spill Cleaning Supplies, PPE)

• Warranty Period from Date of Manufacture:²

  • No Warranty:⁴
    • Spill Clean Up Supplies, PPE, V-Belts

back to top

Notes:

1. Complete Beckett Burners are not covered by this warranty unless prior authorization from Beckett has been received. An RMA is required before returning any complete burner. See 5 below.
2. Damages caused by fuel are not covered by this warranty. Users should only use ASTM D396 #1 and #2 fuel grades. Products marked as B20 compliant may additionally be used with ASTM D396 Grade B6-B20 biodiesel. Products (AF/AFG only) marked as B100 compliant may additional be used with blends containing ASTM D6751 B100 biodiesel. If the use of other fuels is required, please consult with Beckett for written authorization. The use of unapproved fuel may cause equipment failures including leaked fuels which can cause ground contamination. Equipment failure can lead to property damage, personal injury or death due to carbon monoxide poisoning, fire, or explosion. Please refer to burner rating label to avoid mis-fueling.
3. Non-Beckett branded products not original to the burner should be returned to that manufacturer’s authorized agent in accordance with their warranty terms. Non-Beckett branded equipment sent to Beckett will be returned at customer’s expense or scrapped. Please consult with the manufacturer listed on the product for applicable warranties.
4. These Items are intended to be replaced during routine servicing or are non-Beckett Branded items and are not covered by this warranty.
5. To file a claim under this warranty: R.W. Beckett requires an “Returned Material Authorization” (RMA) number for components, parts, or service tools returned for warranty or analysis. An RMA is also required to return complete burners purchased directly from Beckett. Beckett branded products should be returned freight prepaid, to Beckett’s home office. At Beckett’s discretion, credit or replacement will be provided to the Customer unless the returned product is determined to be free of defect, outside of the warranty period listed and/or damaged through misuse or neglect. In this case the equipment will be returned at the customer’s expense or scrapped. Note: OEM appliance burners should be returned to the original equipment manufacturer in accordance with their return policies.

Click here to fill out an RMA Request
After filling out the form, you will receive an email with directions and a label to return the product correctly.

Click here to check if your part is still under warranty